Description of products
Mova Plaster 10 - a senior plaster with
grade 100#, is ready-mixed and packed in the Plant. Mova Plaster 10 removed all
harmful impurities such as mud, organic and inorganic impurities and especially
it has high duration and is environmental – friendly. The components of Mova
Plaster 10 include Polyme cementing materials, screened dry sand and
multi-functional additives produced in accordance with formula researched and
developed by Mova Laboratories.
Applied fields:
Mova Plaster 10 is used to plaster walls of indoor and outdoor
works which use kinds of bricks such as cored bricks, non-burned block brick and
light concrete brick with plastering thickness of 7 – 10mm, only two third
thickness of traditional plastering.
Typical applications:
-
High buildings require senior quality
-
The works located in narrow lane in city and urban
areas
-
New-constructed cultural works such as pagoda, church,
monument, cultural house, museum…
-
The works in use need be repaired, improved without
stopping operations
-
Restoring the foresaid works
Typical advantages:
1. The quality of Mova Plaster is controlled in the Plant and meets
international standards.
Mova
Plaster is measured out, ready-mixed and packed on high-automatic production
line in accordance with Gernman Technology.
2. Clean
plaster with duration of two or three times higher compared with traditional
plaster
Mova Plaster 10 removed all harmful impurities such as
mud, organic and inorganic impurities like rotten wood, wastes etc… in sand during
production.
3. Construction period is shortened one forth
and early put into use:
-
Shortening one
forth waiting period to execute such next steps as painting, trowelling and
paving decarative materials…thanks to Mova plaster’s strength promply satisfies
design grade and dryness which allow early perfection.
-
Shortening one
third labor cost and execution time thank to not requiring sand screening at
site before plastering
-
Cutting down 90%
execution time and cost of sanitation, transporting wastes from site as
resulted from no materials dropped out during maintenance and construction.
4. Saving one third materials compared with
traditional plaster:
-
Mova plaster is
light, only equal to two third of density of traditional plaster
-
Plastering
thickness of Mova is thick, only equal to two third of traditional plaster
-
Loss rate is
unsignificant, reducing 95% loss rate of materials use allowed by the State
norm.
5. Environmental-friendly, improving users’
living standard.
The entire production,transportation and use process
cause no waste, environmental polution and the special features of Polyme
cement plaster are not to cause shrinkage and shattering to the works during
use.
Certificate:
Mova Plaster 10 is compliant with
Vietnamese Standard TCVN 4314:2003
Please attention when use:
It is not allowed to add any more
products
In any special cases, please contact
technique section of Mova
Instructions for using Mova
Plaster 10:
-
Automatically and continuously mixing by mixing
station silo D 40
-
Automatically mixing by mixer M-tec D 20 for packed
plaster
-
Mixing by concrete mixer or manual
Thông số kỹ thuật:
Specification:
-
Compression strength (28 days): at least 100kG/cm2
-
Density (Kg/m3)
: 1690 kg/m2 dry
-
Level of mixing water = (19-22)% dry plaster mass
-
Plastering thickness of Plaster 10 : from 7mm to 10mm
-
Output :
1 ton Plaster 10 provides 590 ltters fresh plaster
1
bag of 50 kg provides 29.5 liters fresh plaster
Use rate:
Actual use weight of Plaster 10: 21kg/
1m2/cm thickness
Packing:
- Packed in moistureproof paper bag,
type of 50kg, 40 bags/ Jambo moistureproof bag.
- In Jambo bag, type of 1000kg
- In automatical pumping and mixing silo
M-tec installed at site
Storage and maintenance:
-
In bag: at least 6 months in non-open condition,
stored in dry place
-
In bulk in Jambo bag, in solo protected fully against
impacts of air
-
No special attention
Safety:
Precautions:
Mova Plaster 10 is the product originated in cement, alkaline. It is necessary
to take appropriate measures to minimize direct contact with skin. If material
is splashed into eyes, wash immediately with water and see a doctor immediately.
I want to share a testimony on how Le_Meridian funding service helped me with loan of 2,000,000.00 USD to finance my marijuana farm project , I'm very grateful and i promised to share this legit funding company to anyone looking for way to expand his or her business project.the company is funding company. Anyone seeking for finance support should contact them on lfdsloans@outlook.com Or lfdsloans@lemeridianfds.com Mr Benjamin is also on whatsapp 1-989-394-3740 to make things easy for any applicant.
ReplyDelete